Stud/nut thread Pitch:M12*1.25*48
Actual product thickness:0.78inch(20mm)
They are CNC machined out of billet aluminum and then anodized silver.
Material:High quality aerospace 6061 T6 aluminum for durability and fit,with heat-treated and hardened 10.9 grade bolts pre-installed.
Reference Compatible Vehicles：
1995-1998 Nissan 240SX (Will NOT fit Base Models)
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra
2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
1.It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
2. Buyer's need to measure the length of their vehicle's OEM/Factory wheel studs, to ensure it doesn't extend past the surface of the spacer
3. Installation should only be performed by a trained professional.
4.Make sure you get 6-8 FULL TURNS of the lug nuts before tightening
5.Avoid using an impact wrench; improper usage may cause damage to components
6.Check and re-torque all lug nuts after 25-50 miles of driving
Our wheel spacers compared with other supplier’s material,to know that the gasket forged by 1000 tons,high gravity forgings will make the original longitudinal aluminum fiber cross and complex,which makes the disc body dense,good mechanical property,good hardness and high safety.